Home

Increased Accuracy, Lower Barrel Temperature, Cleaner Barrels, and Increased Cyclic Rate
Tests on several types of guns showed that after using Blue Magic Oil, accuracy was increased, barrel temperature was lowered, barrels were cleaner after firing, and the cyclic rate was increased. The tests were conducted at Caswell Shooting Range,  Mesa, Arizona 85024,. The tests were overseen and performed by John Campbell, Manager of Caswell Shooting Range, and Rick Kennedy, owner of Kennedy Kustom Guns. The thermometer used was a Fluke 51, Type K. The timer used to test the rate of fire was a Pact Mark III Championship Timer and Chronograph.

Described below are several tests performed using Blue Magic Oil.

Test #1. 9mm MP5 Machine Gun
A 9mm MP5 fully automatic German machine gun with a fluted chamber was cleaned using normal procedures. Then, 31 rounds were fired using PMC 9A 9MM Luger 115GR.FMJ Lot #9A-427 ammunition . The temperature of the barrel was 103.7 degrees after shooting. It took 2.16 seconds to fire the 31 rounds, which equals a cyclic rate of 861 rounds per minute.

The machine gun was stripped and the barrel recleaned. Some Blue Magic Oil was applied to the barrel and some of the moving parts of the gun. Then, another 31 shots were fired. The maximum temperature was 96.2 degrees after firing which is a decrease of 7.5 degrees. The turning time was 2.1 seconds which equals 885 rounds per minute, an increase of 24 rounds per minute.

Test #2. Cap and Ball Black Powder Shooting
Joe Wilby of California commented that he normally gets 11 to 15 shots with his Cap and Ball Black Powder Rifle before having to clean his gun because of loss of accuracy. He tried the Blue Magic Oil and after 50 plus shots, his accuracy had not changed. After he got home that evening, he used only a few patches to clean his gun. Normally, he says it takes "about half a bedsheet" to clean his gun.

Why Blue Magic Oil Works
After using Blue Magic Oil to clean a rifle, the tests show a minimal lead buildup in the rifle which produces a lower barrel temperature which reduces friction and results in increased accuracy. The minimal lead buildup makes the gun easier to clean after shooting.

How Blue Magic Oil Works
The ingredients in the Blue Magic Oil are impregnated into the carbon steel pores. This material does not work as well on  some stainless steel materials as it does on carbon steel, but still shows great improvement. The more the Blue Magic Oil is used, the better the lubrication impregnates and builds up. We have not found it to overbuild.

For example, a 9mm pistol with a slide action on the top was cleaned with solvent and then some Blue Magic Oil was worked into the gun over a period of several hours. Then the gun was re-cleaned with solvent and put back together with no oil. After re-cleaning the gun (no oiling), it had better lubricity than when regular gun oil was used. This shows that after the oil is gone, the lubrication still works.

Also, other tests have shown that Blue Magic Oil has reduced the amount of pull on the trigger.

When resizing military brass (the toughest to resize), too much lubricant on the brass can cause the case to hydraulic and be crushed. The Blue Magic Oil was liberally applied to brass and the case was sized without being crushed. We were unable to cause the case to hydraulic even after repeated additions of Blue Magic Oil. We also found that after oiling the case, we could resize many more pieces of brass without having to re-oil, because the lubricity was impregnated into the die.

Dear Gun Enthusiast:
Blue Magic Oil will extend the life of your gun. After you have tried Blue Magic Oil and found spectacular results, we would like to hear from you and with your permission, include your testimony and name in our upcoming catalog. Please contact us by phone, fax, or e-mail.

It comes in a 1oz bottle and the price is $24.95.

Testimony from P. Gorbenko

Also view the incredible firearms Coatings available from Alpha Tech Coatings!

MANUFACTURED BY